20|20 Gen 3

Limited Software Release

Download the latest version of 20|20 software for use on Generation 3 displays

Updated April 29, 2021

Download 20|20 software updates from the links below, from the Precision Planting Cloud, or over the air if your Gen 3 is connected to a WiFi hotspot. To learn more about how to install software click here.

Latest Limited Software Release

2021.1.4

Download 20|20 limited software version 2021.1.4

Download 20|20 limited boot software version 2021.1.4

Before installing 2021.1.x software, back up prescriptions and boundaries onto a USB drive. After installing the update, they will need to be reimported and assigned to the fields.

Released April 29th, 2021.

Reasons to upgrade software:

Any grower experiencing issues where 20|20 will not swath off to its own coverage should update.

Improvements

  • General 20|20:

    • Made improvements to imported boundary files.
    • Fixed an issue that caused a display crash when vacuum was set up without a rate section setup.
    • Made improvements to an issue where 20|20 would not swath off to its own coverage.

These improvements relate to coverage recorded while on 2021.1.4 software. If you have experienced this issue on previous 2021.1.x software versions, export and re-import the coverage map if you update software mid-field.

  • SmartDepth:

    • Improved event codes displayed for SmartDepth.

Systems that require 2021.1.x Software

  • SmartDepth
  • Row Cleaner Module
  • EM FlowSense

Next anticipated Software Release:

May - June 2021.

Previous Limited Software Releases

2021.1.3

Download 20|20 limited software version 2021.1.3

Download 20|20 limited boot software version 2021.1.3

Before installing 2021.1.x software, back up prescriptions and boundaries onto a USB drive. After installing the update, they will need to be reimported and assigned to the fields.

Released April 23rd, 2021.

Reasons to upgrade software:

  • If you are experiencing an issue with the display date/time reverting to the year 2020 while connected to GPS, update to this version
  • If you are experiencing issues with Smart Connector Passive mode, update to this version.

Features

New Software Features

  • Added the ability to import ADAPT 3rd Party files consisting of Field Names, Prescriptions and Boundaries to the 20|20.
  • Added a new applying map layer available on any granular system. This map layer shows a green layer for when the product is applied through the blockage module.
  • In some cases you may want to change the units of measure for your imported prescription. Added a button to allow prescription units of measure to be changed on the prescription editor page.

Improvements

  • Planter Measurements:

    • Dual Rear Center Trailing planter, fixed an issue that caused the ‘B’ and ‘G’ seed exits to be incorrect and fixed an issue with that caused the ‘C’ and ‘F’ seed exits to be incorrect.
    • Addressed an issue that caused Dual Front, Dual Rear and Dual Rear Center Trailing offsets to save correctly.
  • FieldView:

    • Added the FVM software version and serial number on the ‘About’ page found in Display Settings.
    • Made improvements to an issue that could cause the FVM to create a block of coverage if a boundary or prescription is assigned.
  • SmartDepth:

    • Fixed an issue that could cause a SmartDepth module to falsely fail calibration.
  • Liquid Products:

    • Tank Mix - Fixed an issue when entering a tank size of 0 gallons.
    • Liquid Control Page - Fixed an issue that caused the word ‘Rows’ to be shown twice when set up as section control.
  • General 20|20:

    • Addressed an issue that caused some cases of the 20|20 Display date and time to get set incorrectly.
    • Fixed an issue where Quick Start did not work for seeding controlled systems.
    • Improved performance on Smart Connector Passive Mode for select systems.
    • Improved the Data Import and Data Export pages.

      • An icon with a monitor and a 3 indicates that data can be imported and exported from a 20|20 Gen3.
      • An icon with a monitor and a 2 indicates that data can be imported from a 20/20 Gen2.
      • An icon with a computer and arrows indicates that data can be imported from a third party program such as ADAPT.

2021.1.2

Download 20|20 limited software version 2021.1.2

Download 20|20 limited boot software version 2021.1.2

Released April 8, 2021.

Reasons to upgrade software:

  • If your planter is equipped with SpeedTube and are planting crops other than corn.
  • If your 20|20 is on Limited Release 2021.1.X and are planning to use your 20|20 to harvest it is important to update to 2021.1.2 or newer when you are ready to harvest.

Features

New Software Features

  • SmartFirmer:

    • The SmartFirmer OM Control page now shows non-control products in the list. This feature includes alerts and alarms when using OM Control for products such as FlowSense.

Improvements

  • SpeedTube:

    • Resolved an issue that caused SpeedTube seed detection to remain on corn. If you are planting with crops other than corn it is important to update.
  • Liquid Tank Mix:

    • Improved the navigation for liquid tank mix summary data and moved the button to Counter Details.
    • Added a “Last Pass” summary for the last applied Tank Mix pass data to be shown.
    • Added support for Metric units to be used in the Tank Mix creator.
  • DeltaForce:

    • Improved the hydraulic supply pressure limitations for the DeltaForce Air Purge Test.
    • Fixed an issue with the DeltaForce control button, now it allows you to change applied force by pressing and holding the control button and using the +/- buttons.
  • Harvest - YieldSense:

    • Fixed an issue with OEM CAN data not being reported correctly.
    • Enhanced the Automatic Swath Sensitivity setting to show a percentage value.
    • Added support for viewing and swathing to an imported boundary file.
  • General 20|20:

    • Language translation improvements for French, Ukrainian and Russian.
    • Improved the Display Base Module (DBM) diagnose page colors to indicate different issue states.
    • Improved Counter Details Summary Data loading speeds.

2021.1.1

Download 20|20 limited software version 2021.1.1

Download 20|20 limited boot software version 2021.1.1

Released March 23, 2021.

Features

New software features

  • Added a way to import Client / Farm / Field data from a Gen2 20/20 to a Gen3 20|20. Click here to learn more about upgrading from Gen2 to Gen3
  • New Features for SmartDepth include:

    • Added a setting to configure an offset for SmartDepth found in the Depth Settings page.
    • Updated the SmartDepth firmware for improved performance.
  • New Features for Row Cleaner Module include:

    • Row Cleaner Pressure map and metric.
    • Row cleaner alert found in the Crops page.
  • New Counter Details Summary Data for the following products:

    • Closing
    • Depth
    • Row Cleaner Module
  • Added Compatibility for Display Base Modules hardware change*
  • Smart Connector improvements for passive seed data on planters like Exactemerge.

Improvements

  • Electromagnetic (EM) FlowSense:

    • Fixed an issue that showed the incorrect information when pressing and holding the Electromagnetic FlowSense Control button.
    • Improved the Electromagnetic FlowSense zero accuracy.
  • SmartDepth:

    • Fixed an issue with changing crops and using SmartDepth.
    • Text improvements to the Depth Control page.
    • Improved SmartDepth Moisture Control.
    • Fixed an issue with SmartDepth that would stop module operation if the module was installed with 201x.x.x software.
  • Row Cleaner Module:

    • Updated Row Cleaner Module state when CCM switches are off.
    • Resolved an issue that caused Row Cleaner Module not to enable on systems with a Smart Connector.
  • FurrowForce:

    • Fixed an issue where FurrowForce Load Cells would not zero without a FurrowForce Control Module.
    • Resolved an issue that caused FurrowForce not to enable on systems with a Smart Connector.
  • General 20|20:

    • Addressed an issue with importing certain prescription files.
    • Fixed an issue with importing boundaries.
    • Smart Connector improvements for passive seed data on planters like Exactemerge.
    • Addressed an issue on the Row Details page with down force metrics.
    • Fix an issue that can cause the date/time on the display to show incorrectly.
    • Updated DBM firmware to improve connectivity.

*This applies to serial number 30115000 and higher

2021.1.0

Download 20|20 limited software version 2021.1.0

Download 20|20 limited boot software version 2021.1.0

Released March 2, 2021.

Features

New hardware support

  • SmartDepth
  • Row Cleaner Module
  • Electromagnetic FlowSense

New software features

  • Added Fendt Planter Make
  • Added Fendt and White Load Cells
  • Prescription Editor
  • Improved Simulated Headlands to be viewable on the map
  • Tank Mix for liquid systems
  • Improved the USB Imported Swath Coverage from another 20|20 Gen3 to show the coverage map on the imported 20|20.
  • Updated Portuguese, French, German, Ukrainian, and Russian Translations.

Improvements

  • Fixed an issue that caused the DeltaForce Applied Health Check to not function on a planter with CAN A and CAN B.
  • Changes to the Smart Connector Setup page
  • Moved the Vacuum Sensor Setup to the Seeding Setup Tab
  • Fixed an issue when entering a negative offset value for vDrive Insecticide