20|20 Gen 3

Liquid alerts

Configure liquid alerts for operator awareness.

Updated June 29, 2020

For planting, navigate to:

  • Setup
  • Crops
  • Liquid alerts

For sidedress, navigate to:

  • Setup
  • Liquid alerts
Liquid alerts screencap

Flow alert

Select a flow percentage rate. If flow is outside the selected range, the vApply control button on the home screen will turn yellow.

Disable flow alert

Disable the flow alert by pressing the green "Enabled" button. This turns it yellow, to "Disabled." Select again to re-enable the flow alert.

Flow alarm

If the flow drops below the selected percent, the vApply control button will turn red on the home screen.

Disable flow alarm

Disable the flow alarm by pressing the green "Enabled" button. This turns it yellow, to "Disabled." Select again to re-enable the flow alarm.

Tank alert

Select a tank percentage. If the level of liquid in the tank falls below this percentage, the tank volume metric on the home screen will turn yellow.

Disable tank alert

Disable the tank alert by pressing the green "Enabled" button. This turns it yellow, to "Disabled." Select again to re-enable the tank alert.

Tank alarm

Select a tank level percentage. If the level of liquid in the tank falls below this percentage, the tank volume metric on the home screen will turn red and sound an alarm.

Disable tank alarm

Disable the tank alarm by pressing the green "Enabled" button. This turns it yellow, to "Disabled." Select again to re-enable the tank alarm.

Pressure differential alert

If the pressure differential from the input side of the filter to the output side of the filter drops more than the set alert value, an audible warning will sound. A warning message will appear in the vApplyHD control screen in the pressure differential message center.

Pressure differential alarm

If the pressure differential from the input side of the filter to the output side of the filter drops more than the set alarm value, a warning message will appear on the display. The event code will be registered int he notification center. An alarm message will be placed in the vApplyHD control screen in the pressure differential message center.

Take the type of pump and PSI level into consideration when you set the pressure differential alert/alarm. Low PSI systems should set lower values; high PSI systems should set higher values.

Flow alarm action

Select the action the monitor should take if the flow alarm is triggered.

Select between:

  • Jump to DMC, which includes row by row details of flow rates
  • Jump to homepage
  • None

Tank alarm action

Select the action the monitor should take if the tank alarm is triggered.

Select between:

  • Jump to DMC, which includes row by row details of flow rates
  • Jump to homepage
  • None

Time to flow alert/alarm

Enter the amount of time a failure event needs before triggering the alert/alarm.

Liquid alerts screencap 2