Row Cleaner Module Diagnostics
Ensure correct functions of the Row Cleaner Module on the Diagnose Page.
Updated March 11, 2021
Row Cleaner Module Diagnostics
Before planting, ensure all planter diagnostic information is ok:
- Select setup, and then diagnose.
- Everything should be green on the diagnose page.
- Select color legend to view an explanation of what each color indicates.
Modules may be updating during initial connection. Once updates are complete, all modules should be green. If the modules are not green, confirm that the number of rows and planter setup is correct. Still experiencing issues? Refer to the Dealer Service Manual.
Color legend
| Color | Meaning |
|---|---|
| Green | The system is working correctly and communications are good. |
| Yellow | A device or subcomponent is not running at 100 percent. |
| Red | A device has failed, or is expected, but not detected. |
| White | A device is detected, but is not expected. |
| Black | A row has been disabled in the planter configuration. |
| Gray | A device is being detected, updating firmware, or unreachable. |
Row Cleaner Module Diagnostics
When components are powered and communicating properly with the Monitor, modules will be green on the diagnose page.
Navigate to the Row Cleaner Diagnose page by selecting: Setup > Diagnose > Row Cleaner.
The Row Cleaner Diagnostic page displays the following information for each row:
- Row - The row the module is installed on.
- Supply Volts – Voltage at Row Cleaner Module.
- Lift Pressure Cmd (psi) - Displays the commanded lift circuit pressure based on target settings.
- Lift Pressure Actual (psi) - Displays the actual lift circuit pressure
- Down Pressure Cmd (psi) - Displays the commanded down circuit pressure based on target settings
- Down Pressure Actual (psi) - Displays the actual down circuit pressure
Additionally: Lift State position, Radar speed reading, GPS speed reading, Forward Acceleration, Master Planter Switch position, Turn Rate and Tank Pressure reading for the Row Cleaner Tank will be displayed at the bottom of the page.